Crewe's commercial stock is unusually varied — retail units at Grand Junction, offices on Crewe Business Park, industrial space along Weston Road and Crewe Gates, and hospitality along Nantwich Road. We design, install and maintain systems for all of them, from a single cassette above a shop floor to multi-zone VRF across an office building, and we'll work around your trading hours where needed.
Commercial HVAC design, supply, installation and maintenance for offices, retail, hospitality, salons and light-industrial premises.
We've installed and serviced air conditioning systems throughout Crewe and the wider Cheshire area — from terraced homes near Crewe railway station to large commercial premises across the CW1–CW2 postcodes.
Our Crewe-based engineers regularly work across the following areas. If you don't see your town listed, get in touch — we cover most of Cheshire.
Postcodes: CW1–CW2
Airtastic covers the whole of CW1 and CW2: the railway workers' terraces around Mill Street, West Street and the town centre, established suburbs in Coppenhall, Sydney, Leighton and around Queens Park, and the newer estates growing along Crewe Green Road and the edges of town. On the commercial side we serve Crewe Business Park, Crewe Gates and the Weston Road corridor, Marshfield Bank, Grand Junction Retail Park and the trade and engineering firms clustered around the town's rail heritage.
Most Crewe homeowners haven't had AC installed before, so here's exactly what to expect from a typical Airtastic install — from the first phone call to the first cold breeze.
It starts with a look at the building. Crewe's housing runs from solid-brick railway terraces off Mill Street and West Street to timber-framed new-builds at Leighton and along Crewe Green Road, and each behaves differently in heat. We assess room sizes, glazing, sun exposure and where pipework and the outdoor unit can sensibly go, then talk through what you actually want the system to do.
Sizing comes from a room-by-room heat-load calculation rather than guesswork — an undersized unit works flat out and an oversized one short-cycles, so getting the kilowatts right matters. We'll then recommend a model from Daikin, Mitsubishi Electric, Samsung, LG, Fujitsu, Toshiba, Haier or Panasonic to suit your budget, noise expectations and the look you want inside and out, backed by a fixed written quotation.
Floors and furnishings are protected before any tools come out. Indoor and outdoor units are mounted, the refrigerant pipework, condensate drain and cabling are routed as tidily as the building allows, and everything is sealed and trunked neatly. For a typical wall-mounted split in a Crewe home, you'll usually be cooling the room by the time we pack the van.
Before any refrigerant flows, the pipework is pressure-tested with dry nitrogen and held to prove it's leak-free, then evacuated to a deep vacuum to remove air and moisture. Only then is the system charged and commissioned: we verify operating pressures, temperatures across the coil and condensate drainage, and log the results as F-Gas regulations require.
We finish by showing you the system properly — modes, timers, and the habits that keep running costs down. Most units we fit can be controlled from your phone, so we'll connect the Wi-Fi module and get the manufacturer's app working before we go. You also receive your commissioning paperwork and help registering your warranty.
We design and fit every major system type from Daikin, Mitsubishi Electric, Samsung, LG, Fujitsu, Haier and Toshiba — picked to suit your property, not the other way around.
The familiar single-room setup: one indoor unit paired with one outdoor condenser. Well suited to bedrooms, lounges and the box-room home offices common in Crewe's three-bed semis, with quiet modern units available from around 2.5 kW.
Up to five indoor units running off a single outdoor condenser, each room controlled independently. A practical answer where planning, garden space or simple tidiness argues against several outdoor boxes on the same wall.
Cassettes recess into suspended ceilings and throw air in four directions — ideal for shops, surgeries and open-plan offices. Ducted systems hide entirely within ceiling voids, delivering conditioned air through grilles with nothing on show.
Variable refrigerant flow systems serve many zones from one plant setup and can heat some rooms while cooling others. The right choice for larger offices, hotels and multi-tenant buildings around Crewe Business Park and the town's industrial estates.
Every system we install is a reversible heat pump: the same wall unit that cools a stuffy bedroom in a heatwave will warm it on a frosty morning. Because heat pumps move warmth rather than generate it, they typically return several units of heat for each unit of electricity used — the real-world figure depends on outdoor conditions, the model chosen and how you run it, and we'll set honest expectations at survey.
Real reviews from real installs across Cheshire.
"Mitsubishi multi-split through the upstairs of a 1980s detached. Clean cable run, neat outdoor unit on the side return, properly commissioned. Couldn't fault them."
"VRF system across two floors of our office. Phased install over weekends so we didn't lose a working day. Six months in, perfect."
"Cassette unit dripping over a customer table on a busy Saturday — Airtastic had it sorted within two hours of the call. Lifesaver."
Yes. We regularly carry out evening, weekend and overnight installations for retail, hospitality and office premises in Crewe — particularly along the high street and main commercial parks.
Yes — we offer flexible 6-monthly or annual planned maintenance contracts with priority response for contract customers. Most commercial systems should be serviced at least once a year to maintain manufacturer warranty.
Yes — we cover Crewe and the wider Cheshire area, including Nantwich, Sandbach, Alsager and Wistaston, Haslington. We operate within a 50-mile radius of Stoke-on-Trent, so same-day or next-day surveys are usually available.
Yes. All Airtastic engineers are F-Gas (Category 1) certified, fully insured and trained on the major manufacturers including Daikin, Mitsubishi, Samsung, LG, Fujitsu and Haier.
Airtastic is headquartered in Basford, so Stoke-on-Trent is home turf. Engineers cover every ST1–ST8 postcode for residential installs, repairs and commercial work — most surveys booked within 24–48 hours.
VRF, cassette and multi-split design for offices, retail, hospitality and salons at Festival Park, Etruria Valley, Hanley and Wolstanton.
Read moreF-Gas certified installs across ST1–ST8 — Hanley, Burslem, Trentham, Hartshill and the A500 corridor. Fixed quote inside 48 hours.
Read moreSame-day call-outs across the six towns for all makes — capacitors, refrigerant leaks, condensate pumps, control boards. No hidden call-out fees.
Read moreOne of our busiest service areas. Airtastic engineers cover all Stafford postcodes (ST16–ST21) for residential, repair and commercial work — most surveys booked within 48 hours.
VRF, cassette and multi-split design for offices, retail and hospitality across Beaconside, Stafford Business Village and the town centre.
Read moreFree survey, fixed quote, F-Gas certified install across ST16–ST21 — Walton, Baswich, Doxey, Western Downs and the town centre.
Read moreSame-day or next-day call-outs across Stafford and Staffordshire — all makes and models, no hidden call-out fees.
Read moreOur Crewe engineers also cover these neighbouring areas — usually with same-week survey availability.
Already a customer or looking for something specific? Explore our other Crewe services.
Get a free, no-obligation quote from a local F-Gas certified engineer. Most Crewe surveys are available within 48 hours.
