From warehouse offices on Halesfield and Hortonwood to retail and hospitality around Southwater and the Telford Centre, we design, install and maintain commercial systems sized for the job — ceiling cassettes, ducted air handling and full VRF. Where downtime matters we schedule work around your operating hours, and every installation can be backed by planned maintenance to protect performance through the summer peak.
Commercial HVAC design, supply, installation and maintenance for offices, retail, hospitality, salons and light-industrial premises.
We've installed and serviced air conditioning systems throughout Telford and the wider Shropshire area — from terraced homes near Telford Town Park to large commercial premises across the TF1–TF7 postcodes.
Our Telford-based engineers regularly work across the following areas. If you don't see your town listed, get in touch — we cover most of Shropshire.
Postcodes: TF1–TF7
Our engineers cover the whole TF1–TF7 area: modern estates at Priorslee, Lawley, Lightmoor, Leegomery, Apley and Muxton; established streets in Oakengates, Ketley, Hadley, Donnington and Horsehay; and homes across Hollinswood, Randlay, Stirchley and Brookside near the Town Centre. On the commercial side we serve units and offices throughout Stafford Park, Hortonwood, Halesfield and Trench Lock, plus retail and leisure premises around Southwater — with sensitive condenser siting for buildings close to the Ironbridge Gorge.
Most Telford homeowners haven't had AC installed before, so here's exactly what to expect from a typical Airtastic install — from the first phone call to the first cold breeze.
Every Telford quote begins with a proper look at the property itself. We measure the rooms, check glazing and insulation — a Lawley or Lightmoor new-build holds heat very differently to an older terrace in Oakengates — and agree where the indoor and outdoor units will sit. You'll receive a fixed written price with no obligation, based on your building rather than a generic assumption.
Using the survey data we size the system properly and recommend a unit to match: Daikin, Mitsubishi Electric, Samsung, LG, Fujitsu, Toshiba, Panasonic or Haier, whichever best suits the room and your budget. For loft conversions, conservatories and heavily glazed south-facing spaces around Priorslee and Apley we calculate the actual heat gain, so the capacity is right first time.
A straightforward single-split rarely needs more than one visit; we arrive in the morning and normally have it running by the afternoon. Our engineers protect floors and furnishings throughout, route the pipework as neatly as the building allows, and position the condenser where it stays quiet and unobtrusive — something we plan with particular care for properties towards the Ironbridge Gorge conservation area at the town's southern edge.
Before any refrigerant flows, the pipework is pressure-tested with nitrogen and vacuumed down to remove moisture — the F-Gas-compliant way to work, and the difference between a system that lasts fifteen years and one that fails early. We then charge the system, run it through heating and cooling modes, and record the commissioning data for your warranty.
We finish by walking you through the controls, connecting the unit to its manufacturer app where available, and showing you the simple filter-cleaning routine that keeps efficiency up. You'll receive your F-Gas paperwork, warranty registration and aftercare details — and if a question crops up months later, there's a straightforward answer on 0330 043 4298.
We design and fit every major system type from Daikin, Mitsubishi Electric, Samsung, LG, Fujitsu, Haier and Toshiba — picked to suit your property, not the other way around.
The workhorse for Telford homes: a single indoor unit paired with an outdoor condenser, ideal for bedrooms, home offices and living rooms. Quick to fit, quiet in operation, and available across every brand we install, from entry-level to whisper-quiet premium models.
One outdoor unit feeds up to five indoor units — a neat answer for the three- and four-bedroom houses that dominate estates like Lawley and Priorslee, where elevations and garden space are best kept clear. Each room retains its own independent temperature control.
Cassettes recess into suspended ceilings and distribute air in four directions — well suited to offices and shop floors across Stafford Park and the Telford Centre. Ducted systems conceal the unit entirely, serving whole floors through discreet grilles for a clean finish.
For larger commercial buildings, VRF technology runs many indoor units from one refrigerant circuit, heating some zones while cooling others simultaneously. It's the efficient choice for multi-storey offices, hotels and mixed-use premises around Telford's business parks.
Every air-to-air system we fit is a heat pump, so the unit that cools a stuffy Lightmoor loft room in summer will warm it through winter too. Because heat pumps move warmth rather than burn fuel to create it, they typically deliver several units of heat for each unit of electricity used — though the real-world figure depends on outdoor temperature, the model chosen and how you run it, all of which we'll talk through honestly at survey.
Real reviews from real installs across Shropshire.
"Daikin unit in the master bedroom and a smaller one in the home office. Survey was thorough, quote was honest, install was spotless. Highly recommend."
"We had Airtastic design and install AC across our warehouse offices. Came in under quote, finished a day early, and the planned maintenance contract is excellent value."
"Old LG unit not cooling — Airtastic fixed it rather than push a replacement. Honest engineers, fair price."
Yes. We regularly carry out evening, weekend and overnight installations for retail, hospitality and office premises in Telford — particularly along the high street and main commercial parks.
Yes — we offer flexible 6-monthly or annual planned maintenance contracts with priority response for contract customers. Most commercial systems should be serviced at least once a year to maintain manufacturer warranty.
Yes — we cover Telford and the wider Shropshire area, including Wellington, Madeley, Dawley and Newport, Shifnal, Bridgnorth. We operate within a 50-mile radius of Stoke-on-Trent, so same-day or next-day surveys are usually available.
Yes. All Airtastic engineers are F-Gas (Category 1) certified, fully insured and trained on the major manufacturers including Daikin, Mitsubishi, Samsung, LG, Fujitsu and Haier.
Airtastic is headquartered in Basford, so Stoke-on-Trent is home turf. Engineers cover every ST1–ST8 postcode for residential installs, repairs and commercial work — most surveys booked within 24–48 hours.
VRF, cassette and multi-split design for offices, retail, hospitality and salons at Festival Park, Etruria Valley, Hanley and Wolstanton.
Read moreF-Gas certified installs across ST1–ST8 — Hanley, Burslem, Trentham, Hartshill and the A500 corridor. Fixed quote inside 48 hours.
Read moreSame-day call-outs across the six towns for all makes — capacitors, refrigerant leaks, condensate pumps, control boards. No hidden call-out fees.
Read moreOne of our busiest service areas. Airtastic engineers cover all Stafford postcodes (ST16–ST21) for residential, repair and commercial work — most surveys booked within 48 hours.
VRF, cassette and multi-split design for offices, retail and hospitality across Beaconside, Stafford Business Village and the town centre.
Read moreFree survey, fixed quote, F-Gas certified install across ST16–ST21 — Walton, Baswich, Doxey, Western Downs and the town centre.
Read moreSame-day or next-day call-outs across Stafford and Staffordshire — all makes and models, no hidden call-out fees.
Read moreOur Telford engineers also cover these neighbouring areas — usually with same-week survey availability.
Already a customer or looking for something specific? Explore our other Telford services.
Get a free, no-obligation quote from a local F-Gas certified engineer. Most Telford surveys are available within 48 hours.
